How to choose a stone carving machine

2022-07-24
  • Detail

Teach you how to choose stone carving machine the emergence of stone carving machine provides another rare business opportunity for the architectural decoration industry. Just like the computer carving machine a few years ago, it is gradually accepted by people. The badges, department signs, various signs, crystal light boxes, building models, mold making, etc. carved by the computer carving machine have become increasingly popular in this industry. While the application of engraving machines is becoming more and more popular, various engraving machines are also gradually emerging in the market. How can users choose their own engraving machines

please pay attention to the following points:

1. Pay attention to the function of the carving machine. The carving motor of the stone carving machine can be divided into high power and low power. Some engraving machines have low power and are only suitable for processing materials such as two-color boards, building models, small signs and three-dimensional handicrafts. This process has been popular for some time, but its application range has been greatly affected due to the low engraving power. The other is the engraving machine with high-power engraving head. This engraving machine can be divided into two categories. One is the large format cutting machine: the format is generally more than one meter 2), but the accuracy of this engraving machine is generally poor; The other is the engraving machine with moderate format: This engraving machine is generally used for fine processing and organic label making

2. To understand the performance and function of the engraving motor, the engraving head motor of the engraving machine is also very important, because the engraving head motor generally does not belong to the scope of warranty, and the engraving head motor works continuously for a long time, so if the engraving head motor is not good, it will also affect the use of the engraving machine

3. In addition, the speed adjustable range of the engraving head motor is generally thousands to 30000 revolutions per minute. If the speed is not adjustable or the speed adjustable range is small, then the application range of the engraving machine is greatly limited, because different materials must be engraved with different engraving head speeds

4. Manufacturing process of engraving machine body: the high-power engraving machine body must be precise and stable when it works. Therefore, the casting body should be used for long-term high-power engraving to ensure its processing accuracy and stability

5. Controllers are generally divided into two types: one type of controller is only used for driving, and all its operations are completed by the computer. When the engraving machine is working, the computer is in a waiting state and cannot perform typesetting. Another type of controller adopts the single board qee-tech process, which also allows customers to build various 3D preform machines or single-chip computers for the introduction and load distribution of five universal insurance products sold by Zhujiang life insurance. This controller is actually a computer, so as long as the engraving machine starts working by pressing the "return" button, the computer can immediately carry out other typesetting work, This advantage is especially obvious when carving for a long time. (end)

Copyright © 2011 JIN SHI