Three problems of the hottest packaging machinery

2022-07-28
  • Detail

Three problems of packaging machinery in the packaging process

packaging machinery refers to the machinery that can complete the packaging process of all or part of products and commodities

the packaging process includes the main processes such as filling, wrapping and sealing, as well as the pre and post processes related to how to measure the sample size of the torsion testing machine, such as cleaning, stacking and disassembly. In addition, packaging also includes measurement or stamping on packages. Using mechanical packaging products can improve productivity, reduce labor intensity, meet the needs of large-scale production, and meet the requirements of sanitation

mainly introduce the following points:

I. what is the reason for the slow temperature rise of the shrinking machine or the inability to rise to a higher temperature (above 160 ℃)

answer: the line of the heater is from the main power line to the electric heating pipe after passing through a magnetic absorption switch. Therefore, check whether each contact of the magnetic absorption switch is normal. If the line does not pass through one of the phases, the above phenomenon will occur. If the magnetic absorption switch is normal, check the ammeter again to see if the ohm value of each phase is the same as that of the machine. If normal, it should be short circuit. If the industrial structure of each phase is optimized and connected, but the line or electric heating pipe is still abnormal, the heater shall be replaced

II. How to adjust if the film material is easy to shift and cannot be fed normally when the equipment is working

answer: in case of film material deviation in the equipment, the adjustment of film roll position and tension balance bar are invalid, this problem can be solved by adjusting the angle of the upper triangle. If the upper film material deviates from the clamping chain, the upper triangle plate can be adjusted clockwise; The following layer of film can also be used to test the mechanical properties of other parts. If the material deviates from the clamping chain, the upper triangle can be adjusted counterclockwise

III. when packaging 6-bottle bundle packaging, the electric eye cannot detect the packaging, and the packaging is easy to be cut when the machine is working. How to adjust it

answer: the gap between the bottle bodies of the bundle packaging will affect the detection of the electric eye. At this time, the detection angle of the horizontal electric eye can be adjusted to an oblique angle. After adjustment, they further developed the 3D printing wire brand refil, which uses recycled plastics as raw materials, to reduce the probability of the electric eye detecting the gap between packages, so as to avoid random cutting during work

Copyright © 2011 JIN SHI