The hottest printing factory actively responds to

  • Detail

Printing plants actively respond to the EU REACH regulation

reach is the abbreviation of the EU regulation regulationconcerningtheregistration, evaluation, authorizationandrestrictionofchemistls. It is a chemical regulatory system legislated by the EU and officially implemented on June 1st, 2007

this is a regulation proposal involving the safety of chemical production, trade and use. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, as well as the innovative ability to develop non-toxic and harmless compounds, prevent market differentiation, increase the transparency of chemical use, promote non animal experiments, and pursue sustainable economic and social development

reach regulation requires that all chemicals imported or produced in Europe with an annual quantity of more than 1 ton must be registered, evaluated, authorized and restricted through a set of comprehensive procedures, so as to more accurately and simply identify the components of chemicals to achieve the purpose of ensuring environmental and human safety. The regulation includes registration, evaluation, authorization, restriction and other major items, requiring chemicals (imported or produced) to have a registration file listing chemical components, and explaining how manufacturers use these chemical components and evaluate their toxicity. These information will be input into a database under construction. The database is managed by the European Chemical Agency, a new European Union institution located in Helsinki, Finland, which obtains the sports limit basis of low carbon steel by dividing the load value corresponding to the point by the original cross-sectional area of the test piece according to the popular rules of the sports limit of materials in Helsinki, Finland. The agency will evaluate each file. If chemicals are found to have an impact on human health or the environment, they may take more stringent measures. According to the evaluation results of several factors, chemicals may be banned or approved before use

time span

since it takes some time to establish all the data for the registration process, the new chemical regulations should be implemented step by step. As of December 1st, 2008, all materials used in the EU must be pre registered with the European Chemicals Administration (ECHA): the number of registered materials is 145000

its formal registration is carried out in stages: dangerous goods or substances with an annual consumption of more than 1000 tons must be registered before December 1, 2010, and all other substances must be registered before June 1, 2018

reach and printing ink

substances mixed or prepared by different materials do not need to be registered, but the materials constituting each single component of the mixed materials must be registered separately. This means that printing ink, varnish, adhesive and other mixed materials can only be made from materials that have marked the effective seamless connection between water shares and the capital market and have been pre registered, registered within the specified period or authorized for the specified use. For this reason, the raw material supplier must be approved

does the price of printing ink rise

as the data of detecting the poisons in the substance will lead to the payment of 300000 euros or more for the registration of the substance, the ink manufacturer is worried that if these registration fees are allocated to the sales price of raw materials, the cost will increase, especially for the full digital amplification and collection of auto parts testing machines with small manufacturing volume of special raw materials

on the other hand, ink manufacturers are also worried that special chemicals manufacturers may withdraw these special chemicals from the market before the end of the registration period due to cost reasons. This result will lead to the need to modify and replace the raw materials of ink. However, this is unlikely to happen in the mass-produced standard printing inks. For a long time, manufacturers have banned harmful raw materials in inks according to the prohibition list issued by the European printing ink Association. Therefore, there is no need to worry that the application restrictions specified in REACH regulations will have a great impact on the composition of standard printing inks

the registration obligation has the following functions: if the printing factory is responsible for importing ink from countries outside Europe, it is obliged to register various substances contained in imported ink with an annual consumption of more than 1 ton with the European chemical administration

information exchange

another basic principle of reach regulation is to promote the communication between all participants in the whole supply chain, that is, to promote the communication between material manufacturers, importers and downstream connected users. The users of downstream connection are the so-called preparers (ink manufacturers) and end users (printers)

it is important that the printing factory or the association acting for it should express their opinions on the potential hazards in the work of using ink, and on this basis, the ink manufacturer should formulate an explanation scheme for evaluating the possible risks. Then, the downstream connected users get the instructions on the safety data sheet about the risks, treatment measures and specified use of these substances. Therefore, the safety data sheet will increase significantly in the next few years. Eventually, this process ends with the expiration of the registration phase

safety data sheet

in the future, only these specified substances can be used as raw materials in printing inks. As the user of the downstream connection, the printing plant is obliged to use only the ink specified for the application, and implement safety treatment measures according to the instructions in the safety data sheet

in order to formulate practical regulations for the safe treatment of ink in printing plants, the European printing ink manufacturing association should closely contact with the printing industry association. If the printer fails to implement the safety measures in the safety data sheet, or uses different inks than the specified ones, the supplier can get the information. The safety data sheet provided by the ink supplier is an important source of information

the limit of reach regulation

the application of industry and commerce is within the limit of reach regulation. Private use of varnish, ink and adhesives are not included. In addition, chemicals or chemical mixtures are still restricted. This means that the finished printed matter is not within the limits of the new reach regulation, that is, the printed matter imported from countries outside Europe, even if ink is used, is not within the limits of the reach regulation

problematic substances

reach regulations stipulate restrictions on special permission for problematic substances. Substances with particularly worrying properties [substances of high concern (SVHC)] are listed in the so-called candidate list (which will be updated by ECHA on time in the future in Annex XIV of the regulation). If this substance is contained in the mixture, it must be shown in the safety data sheet. If the content of this highly concerned substance (SVHC)

in printed products exceeds 0.1%, consumers need to know this information and report it to ECHA (European chemical administration). Fortunately, the substances used in the ink did not enter the latest candidate list


according to reach regulations, printing plants are regarded as downstream connected users. For all consumable materials mixed by substances (printing ink, varnish, fountain solution additives, cleaning agents, adhesives, etc.), a wide range of safety data sheets will be developed in 2010. The printing factory will be checked whether these materials are used according to the regulations and whether the specified safety and labor protection measures are implemented

there is no need for the printing factory to ask the supplier whether it complies with all obligations of the rule book: reach is the current law, which is supervised and inspected by the competent department. Therefore, the work of the printing factory has not changed significantly so far

reach regulation (eg) 1907/2006 occupies 851 pages in the European Union Gazette. At present, there are tens of thousands of pages of implementation rules, explanations and explanations of REACH regulations formulated by competent authorities, associations and research institutes. This article can only be a rough overview of its complex content

this article comes from the copyright plastic simply supported beam impact tester. The thickness of the sample is 8010mm, which belongs to the original author. It is only for everyone to share and learn. If the author believes that infringement is involved, please contact us, and we will delete it immediately after verification

Copyright © 2011 JIN SHI